TM 5-3805-254-34
6-3.
AUXILIARY TRANSMISSION TOP COVER MAINTENANCE (Con’t).
4.
Install shift fork (17) to shift bar (6) as shift bar Is installed toward rear of housing (3). Ensure that long hub of shift
fork faces rear of housing.
5.
Install new screw (16) to shift fork (17). Torque screw to 40-50 Ib.-ft. (54-68 N.m).
6.
With shift bar (6) In neutral position, Install new interlock (21) into housing (3). Ensure that interlock seats in
neutral notch of shift bar.
7.
Apply thin coat of grease to surface of shaft (7) and install shaft with notches facing threaded hole In housing (3).
8.
Install stop sleeve (13) and shift fork (14) to shaft (7) as shaft is installed toward rear of housing (3).
9.
Install new screw (15) to shift fork (14). Torque screw to 40-50 lb.-ft. (54-68 N-m).
10.
Install new ball (11), new plunger (10), new spring (9), and retainer (8) in housing (3).
TA703761
6-31
