TM 5-3805-254-34
6-2.
AUXILIARY TRANSMISSION REPAIR (Con’t).
39.
Apply sealant compound to outer diameter of new seal (41) and press seal into bearing retainer (38).
40.
Apply thin coat of sealant compound to threads of two long screws (40), four screws (42), and both sides of new
gasket (37).
41.
Install gasket (37) and bearing retainer (38) to rear of case (8) with four new lockwashers (43) and screws (42).
42.
Install two new lockwashers (39) and long screws (40). Torque screws (40 and 42) to 60-80 Ib.-ft. (81 -108 N-m).
43.
Install new bearing (36) to front of retainer (29)
with flange of inner race facing upward.
TA703753
6-23
