TM 5-3805-254-34
6-9. INSTALL AND REMOVE TRANSMISSION FROM OVERHAUL STAND (Con’t).
WARNING
Transmission Is heavy. DO NOT remove screws unless transmission Is supported.
Failure to follow this warning may result in Injury or death to personnel.
4.
Raise overhead lifting device and position transmission holding fixture (9) to overhaul stand (6).
5.
Install transmission holding fixture (9) to overhaul stand (6) with four bolts (7) and nuts (5).
6.
Remove overhead lifting device.
b.
REMOVE
1.
Attach overhead lifting device to transmission holding fixture (9) and raise just enough to take weight of
transmission (1) and transmission holding fixture off overhaul stand (6).
WARNING
Transmission is heavy. DO NOT remove nuts and bolts unless transmission Is
supported. Failure to follow this warning may result in injury or death to
personnel.
2.
Remove four nuts (5) and bolts (7) from transmission holding fixlt re (9) and overhaul stand (6).
3.
Move transmission (1) to a safe area and remove four nuts (8), bolts (4), and transmission holding fixture (9).
4.
Install two new lockwashers (3) and bolts (2) to each side of transmission (1). Torque bolts to 67-80 Ib.-ft. (91-
108 N.m).
TA703786
6-63
