TM 5-3805-254-34
6-10. FLYWHEEL REPLACEMENT.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Transmission installed on overhaul stand (see para-
Hydraulic fluid (Item 7, Appendix B)
graph 6-9).
Grease (Item 10, Appendix B)
Dry cleaning solvent (Item 23, Appendix B)
Tools/Test Equipment
One preformed packing
Two preformed packing
General mechanics tool kit
Two gaskets
Field automotive shop set
Two lockwashers
Flywheel lifting bracket
Two guide screws
Personnel Required: Two
General Safety Instructions:
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a. REMOVAL
1.
Remove two bolts (2), lockwashers (3), converter access cover (1), and gasket (4) from top of converter housing
(5). Discard lockwashers and gasket.
2. Remove 29 of 30 bolts (8) and washers (7) from converter pump (6).
TA703787
6-64