TM 5-3805-254-34
6-29. FRONT SUPPORT REPAIR (Cont).
b.
CLEANING AND INSPECTION I
WARNING
Dry cleaning solvent, PD680, Is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point is 100°F138°F (38OC59°C). If you
become dizzy while using cleaning solvent, Immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean metal parts with dry cleaning solvent.
NOTE
Front support and ground sleeve are available only as a unit. Do not attempt to
separate. If either Is damaged, replace as an assembly.
2.
Inspect metal parts for cracks, breaks, wear, or
other damage. Replace if damaged.
3.
Inspect bearing (19) in front support (1) for wear
or damage. If damaged, remove bearing.
4.
Apply thin coat of hydraulic fluid to surface of all
parts.
c.
ASSEMBLY
1.
If removed, press new bearing (19) into front
support (1) using bearing installer and handle.
TA703841
6-124
