TM 5-3805-254-34
6-30. FORWARD CLUTCH REPAIR.
This Task Covers:
a.
Disassembly
c.
Assembly
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Input shaft and forward clutch removed (see para-
•
Loctite adhesive (tem 1, Appendix B)
graph 6-16).
•
Hydraulic fluid (Item 7, Appendix B)
•
Grease (Item 10, Appendix B)
Tools/Test Equipment:
•
Dry cleaning solvent (Item 23, Appendix B)
•
Three seal rings
•
General mechanic's tool kit
•
Ten shim stock, 0.02 X 3/32 X 3 in. (0.51 x 2.38
•
Field automotive shop set
•
x 76 mm)
•
Collector ring staker
•
Forward and fourth clutch spring compressor
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
DISASSEMBLY
1. Remove retaining ring (1) and forward clutch
driving hub (2) from hub (3).
TA703844
6-127
