TM 5-3805-254-34
6-30. FORWARD CLUTCH REPAIR (Con’t).
NOTE
Perform steps 9 through 13 to remove PTO gear
and snapring from forward clutch housing.
9.
Locate gap (18) of snaprlng (17).
10.
Push snapring (17) down into groove In housing
(7) and insert a shim stock between tooth of
PTO gear (19) and outside diameter of snapring.
11.
Repeat step 10 around outside diameter of
snapring (17), about every 3 In. (7.6 cm), to hold
snapring into housing (7).
12.
Remove PTO gear (19) from housing (7).
13.
Remove snapring (17).
TA703848
6-131
