TM 5-3805-254-34
6-30. FORWARD CLUTCH REPAIR (Cont).
9.
Beginning with one external tooth clutch disk (9), alternately install five external tooth clutch disks and five clutch
disks (8) into housing (7).
10.
Install forward clutch driving hub (2) and
retaining ring (1) into housing (7).
11.
While lifting forward clutch driving hub (2)
against retaining ring (1), measure clearance
between top external tooth clutch disk (9) and
forward clutch driving hub. Clearance must be
0.0800.120 in. (2.048 mm).
12.
If clearance Is not within specified limits, replace
clutch disks (8) and external tooth clutch disks
(9) until proper clearance is obtained. Clearance
closer to 0.080 In. (2.032 mm) Is preferred.
13.
Remove retaining ring (1), forward clutch driving
hub (2), clutch disks (8), and external tooth
clutch disks (9).
TA703853
6-136