TM 5-3805-254-34
9-1. FORWARD-REAR DIFFERENTIAL MAINTENANCE (Con’t).
15.
Press on head of bolt (12) to release spring pressure against nut (15), and remove nut and washer (13).
16.
Slowly release pressure and allow no-spin differential assembly (14) to separate until spring pressure is fully
released.
17.
Remove two side gears (22), springs (23), spring retainers (24), and drive gears (25) from spider (26).
c. THRU SHAFT REMOVAL AND DISASSEMBLY
1.
Remove eight bolts (36) and lockwashers (35) from bearing retainer (28). Discard lockwashers.
2.
Drive thru shaft (30) out of differential carrier (2) using mallet.
3.
Remove bearing retainer (28) and gasket (29) from thru shaft (30). Discard gasket.
4.
If damaged, remove seal (27) from bearing retainer (28). Discard seal.
9-5
