TM 5-3805-254-34
9-1.
FORWARD-REAR DIFFERENTIAL MAINTENANCE (Cont).
NOTE
Bearings and bearing races will remain Inside bearing housing during step 4. These will only be
removed if damaged, in subparagraph e.
4.
Remove bearing housing (49) and shims (48)
from differential carrier (2). Attach shims to
bearing housing to ensure that same number are
installed.
5.
Tap cross-shaft (50) and ring gear set (51)
toward thru shaft chamber of differential carrier
(2).
6.
Install two cross-shaft removal spacers (52)
between back of ring gear set (51) and inner wall
of differential carrier (2).
7.
Press cross-shaft (50) from differential carrier
(2). Remove two cross-shaft removal spacers
(52) from differential carrier.
TA703941
9-8