TM 5-3805-254-34
12-8. STEERING KNUCKLE MAINTENANCE (Con’t).
10.
Install arm (6) and key (7) to steering knuckle (3) with slotted nut (8). Torque slotted nut to 400 lb.-ft. (542 N-m)
and install new cotter pin (9).
11.
Install upper steering arm (4) and key (5) with slotted nut (2). Torque slotted nut to 400 lb.-ft. (542 N m) and
install new cotter pin (1).
FOLLOW-ON TASKS:
Install tie-rod and drag link (see paragraphs 12-10 and 12-11).
Install front dust shield and brake spider (see paragraph 10-1).
Install front airbrake chambers (see TM 5-3805-254-20).
Install right front wheel to front brake limiting and quick-release valve hoses (see TM 5-3805-254-20) (right knuckle).
Install left front wheel to front brake limiting and quick-release valve hoses (see TM 5-3805-254-20) (left knuckle).
Install front brakeshoes (see TM 5-3805-254-20).
Install hub, brakedrum, and wheel bearings (see TM 5-3805-254-20).
Lubricate steering knuckle and steering system (see LO 5-3805-254-12).
Install front wheel (see TM 5-3805-254-20).
Aline wheels (see TM 3805-254-20).
TA704066
12-57
