TM 5-3805-254-34
12-9. STEERING WHEEL REPLACEMENT (Con’t).
c. ALINEMENT
NOTE
Perform these procedures to center steering wheel with front wheels of vehicle.
Steering wheel must be Installed on steering shaft with alinement marks alined. Do not attempt
to center steering wheel with frontwheels of vehicle by Installing steering wheel In any other
position on steering shaft.
1.
Position front wheels of vehicle straight ahead.
2.
Disconnect drag link (9) from steering arm (see paragraph 12-11).
3.
Rotate steering wheel (1) until alinement mark (10) on end of steering gear output shaft (11) is perpendicular to
steering gear input shaft (8).
4.
Remove yoke (7) from steering gear input shaft (8) (see paragraph 12-6).
5.
Rotate steering wheel until centered.
TA704068
12-59
