TM 5-3805-25434
13-4. TORQUE ROD REPLACEMENT.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
· Dry cleaning solvent (Item 23, Appendix B)
· General mechanic's tool kit
· Four lockwashers
Field automotive shop set
General Safety Instructions:
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
REMOVAL
1.
Remove nut (5) and screw (2) from bracket (4).
2.
Remove machine key (1) from torque rod (6).
3.
Remove machine key (7) from torque rod (6).
4.
Remove four screws (12), lockwashers (11), torque rod bracket (10), and dowel pin (9) from frame (8). Discard
lockwashers.
5.
Remove torque rod (6) from frame (8) and bracket (4).
6.
Repeat steps 1 through 5 to remove torque rod (3).
13-20
