TM 5-3805-254-34
15-36.
DUMP BODY REPLACEMENT (Con’t).
WARNING
Welding or cutting may produce fumes and gases hazardous to health. Avoid breathing these
fumes and gases.
3.
Using metal cutting torch, remove two steel plates (7) from dump body (2) to expose each end of cylinder pin (5).
4.
Remove cylinder pin (5) from top of hydraulic cylinder (6).
WARNING
Ensure that vehicle Is on level ground and that rear wheels are chocked to prevent vehicle from
moving. Severe Injury to personnel may result.
5.
Using suitable overhead lifting device attached to dump body (2), raise dump body just enough to take weight of
dump body off hinge bar (9).
6.
Remove two cotter pins (11), spacers (10), and hinge bar (9) to separate dump body (2) from frame (8). Discard
cotter pins.
TA704210
15-107
