TM 5-3805-254-34
16-1.
POWER TAKE-OFF REPLACEMENT (Con’t).
7.
Remove bolt (7) and copper washer (12) from power take-off (3). Discard copper washer.
8.
Remove retaining ring (11) and captive capscrew (8). Discard retaining ring.
9.
Loosen setscrew (15) and remove yoke (14) and propeller shaft (1) from power take-off shaft (16).
10.
Remove woodruff key (13) from power take-off shaft (16).
b.
INSTALLATION
1.
Install woodruff key (13) in power take-off shaft (16).
2.
Install yoke (14) and propeller shaft (1) to power take-off shaft (16) and tighten setscrew (15).
3.
Install captive capscrew (8) to power take-off (3) with new retaining ring (11).
4.
Loosely install new copper washer (12) and new bolt (7) to power take-off (3).
5.
Install new gasket (10) and power take-off (3) to top of transmission (9).
6.
Install four new copper washers (5) and nuts (6). Tighten four nuts (6) and bolt (7).
7.
Tighten captive capscrew (8).
TA704215
16-3
