TM 5-3805-264-13&P
0005
DUMPING LOAD - Continued
NOTE
Speed of dump body movement when it is being raised may be controlled with
accelerator pedal.
b.
Squeeze T-handle together and pull hydraulic control lever (Figure 3, Item 1) back to UP position.
Body up indicator light (Figure 3, Item 2) should come on as dump body is raised.
WARNING
DO NOT try to loosen a sticky load by pulling forward or backward and braking
abruptly. Failure to comply may result in personnel injury and/or damage to
equipment.
NOTE
Dump body will stop automatically when hydraulic cylinder is fully extended or when
hydraulic control lever is placed in N (Neutral) position.
c.
Return hydraulic control lever (Figure 3, Item 1) to N (Neutral) position when dump body is fully raised
or has reached desired height.
3.
Lowering Dump Body
CAUTION
Dump body must be lowered onto truck frame with engine running at idle speed.
Failure to comply may result in damage to equipment.
a.
With engine at idle speed, squeeze T-handle together and push hydraulic control lever
(Figure 3, Item 1) forward to DOWN position. Body up indicator light (Figure 3, Item 2) should turn off
when dump body contacts truck frame.
0005-8
03/15/2011Rel(1.10)root(opusualwp)wpno(O1000226413)