TM 5-3805-264-13&P
0041
REMOVAL
1.
Attach lifting slings (Figure 1, Item 4) to tailgate (Figure 1, Item 5) and remove slack from lifting slings.
2.
Remove linch pins (Figure 1, Item 3) and hinge pins (Figure 1, Item 1) from each side of tailgate
(Figure 1, Item 5).
3.
Lift tailgate (Figure 1, Item 5) from dump body (Figure 1, Item 2) and place tailgate in a safe work area.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
WARNING
Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings
must be in good condition and of suitable capacity. Keep clear of parts supported only by
lifting device. Failure to comply may result in personnel injury, death, and/or damage to
equipment.
1.
Raise tailgate (Figure 1, Item 5) to dump body (Figure 1, Item 2).
2.
Position tailgate (Figure 1, Item 5) so that bottom pins (Figure 1, Item 6) are resting on dump body stops
(Figure 1, Item 7) and tailgate hinge pin holes are aligned with dump body hinge pin holes.
3.
Install hinge pins (Figure 1, Item 1) and linch pins (Figure 1, Item 3) on each side of tailgate
(Figure 1, Item 5).
4.
Remove lifting slings (Figure 1, Item 4) from tailgate (Figure 1, Item 5).
0041-2
03/15/2011Rel(1.10)root(maintwp)wpno(M1001626413)