TM 5-3805-264-13&P
0040
INSTALLATION - Continued
2.
Install mounting plate (Figure 4, Item 4) on weldment (Figure 4, Item 1) and dump body with
shaft (Figure 4, Item 9), two washers (Figure 4, Item 3), and new spring pins (Figure 4, Item 2)
through shaft.
3.
Install mud flap (Figure 4, Item 7) and plate (Figure 4, Item 5) on mounting plate (Figure 4, Item 4) with four
screws (Figure 4, Item 6) and new locknuts (Figure 4, Item 8).
Figure 4. Mud Flap Installation.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.10)root(maintwp)wpno(M1002926413)