TM 5-3805-264-13&P
0044
REMOVAL
1.
Remove four screws (Figure 1, Item 3), lockwashers (Figure 1, Item 2), MCS gate (Figure 1, Item 4), and
two brackets (Figure 1, Item 1) from tailgate (Figure 1, Item 5). Discard lockwashers.
2.
Remove two brackets (Figure 1, Item 1) from MCS gate (Figure 1, Item 4).
Figure 1. MCS Gate Removal.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
1.
Position two brackets (Figure 2, Item 1) on MCS gate (Figure 2, Item 4).
2.
Install two brackets (Figure 2, Item 1) and MCS gate (Figure 2, Item 4) on tailgate (Figure 2, Item 5) with
four new lockwashers (Figure 2, Item 2) and screws (Figure 2, Item 3).
03/15/2011Rel(1.10)root(maintwp)wpno(M1002026413)
