TM 5-3805-264-13&P
0064
INSTALLATION
NOTE
Use antiseizing tape on all pipe threads (WP 0072).
Install hose support clamps and new tiedown straps as necessary.
Perform Steps 1 through 4 to install two hydraulic cylinder hoses and fittings.
1.
Install elbow (Figure 2, Item 5) and elbow (Figure 2, Item 7) on hydraulic cylinder (Figure 2, Item 6).
2.
Install elbow (Figure 2, Item 10) and adapter (Figure 2, Item 11) on hydraulic pump (Figure 2, Item 12).
3.
Install hose (Figure 2, Item 8) on elbow (Figure 2, Item 7) and elbow (Figure 2, Item 10).
4.
Install hose (Figure 2, Item 9) on adapter (Figure 2, Item 11) and elbow (Figure 2, Item 5).
NOTE
Perform Steps 5 through 7 to install suction hose.
5.
Install elbow (Figure 2, Item 17) and hose barb (Figure 2, Item 16) on bottom of hydraulic reservoir
(Figure 2, Item 4).
6.
Install adapter (Figure 2, Item 13) on hydraulic pump (Figure 2, Item 12).
7.
Install suction hose (Figure 2, Item 15) and two clamps (Figure 2, Item 14) on adapter (Figure 2, Item 13)
and hose barb (Figure 2, Item 16). Tighten clamps.
NOTE
Perform Steps 8 through 11 to install return hose and fittings.
8.
Install tee (Figure 2, Item 2) on filter housing (Figure 2, Item 3).
9.
Install oil sampling valve (Figure 2, Item 1) on tee (Figure 2, Item 2).
10.
Install adapter (Figure 2, Item 18) on hydraulic pump (Figure 2, Item 12).
11.
Install return hose (Figure 2, Item 19) on adapter (Figure 2, Item 18) and tee (Figure 2, Item 2).
0064-4
03/15/2011Rel(1.10)root(maintwp)wpno(M1004026413)
