TM 5-3805-264-13&P
0063
REMOVAL
CAUTION
Ports and hoses in reservoir should be plugged to prevent contamination of hydraulic
system (WP 0072). Failure to comply may result in damage to equipment.
1.
Loosen four screws (Figure 1, Item 2), rotate filter housing cover (Figure 1, Item 1), and lift cover from filter
housing (Figure 1, Item 3).
2.
Remove oil filter element (Figure 1, Item 4) and discard.
3.
Remove O-ring (Figure 1, Item 5) from groove in filter housing cover (Figure 1, Item 1). Discard O-ring.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
1.
Coat new O-ring (Figure 1, Item 5) with lubricating oil and install in groove of filter housing cover
(Figure 1, Item 1).
2.
Install new oil filter element (Figure 1, Item 4) on filter housing (Figure 1, Item 3).
3.
Install filter housing cover (Figure 1, Item 1) on filter housing (Figure 1, Item 3) with four screws
(Figure 1, Item 2).
0063-2
03/15/2011Rel(1.10)root(maintwp)wpno(M1004326413)