TM 5-3805-264-13&P
0062
INSTALLATION - Continued
16.
With transfer case selector lever in N (Neutral) position, install pivot pin (Figure 10, Item 2) in bracket
(Figure 10, Item 10) and secure with retaining pin (Figure 10, Item 1). Remove tag from cable
(Figure 10, Item 9).
17.
Install spacer (Figure 10, Item 4), cable (Figure 10, Item 9), clamp (Figure 10, Item 5), two screws
(Figure 10, Item 3), washers (Figure 10, Item 6), and nuts (Figure 10, Item 7) on bracket (Figure 10, Item 8).
Figure 10. Transfer Case Shift Cable Connection.
03/15/2011Rel(1.10)root(maintwp)wpno(M1003926413)
