TM 5-3805-264-13&P
0065
INSTALLATION
WARNING
Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings
must be in good condition and of suitable capacity. Keep clear of parts supported only by
lifting device. Failure to comply may result in personnel injury, death, and/or damage to
equipment.
1.
Install lifting sling through loop in hydraulic cylinder (Figure 2, Item 2) and attach lifting sling to lifting device.
2.
Position hydraulic cylinder (Figure 2, Item 2) on vehicle.
3.
While holding hydraulic cylinder (Figure 2, Item 2) securely, position left and right mounting brackets
(Figure 2, Items 4 and 12) to hydraulic cylinder (Figure 2, Item 2).
4.
Install left and right mounting brackets (Figure 2, Items 4 and 12) on dump body (Figure 2, Item 1) with six
screws (Figure 2, Item 5) and new locknuts (Figure 2, Item 3).
5.
Install lower end of hydraulic cylinder (Figure 2, Item 2) on cylinder support frame (Figure 2, Item 8) with
pivot pin (Figure 2, Item 10), screw (Figure 2, Item 11), and new locknut (Figure 2, Item 9).
6.
Remove lifting sling from lifting device and hydraulic cylinder (Figure 2, Item 2).
7.
Install two elbows (Figure 2, Item 6) on lower end of hydraulic cylinder (Figure 2, Item 2). Connect two hose
assemblies (Figure 2, Item 7) to elbows.
0065-5
03/15/2011Rel(1.10)root(maintwp)wpno(M1005026413)
