TM 5-3805-264-13&P
FIELD MAINTENANCE
ILLUSTRATED LIST OF MANUFACTURED ITEMS
INITIAL SETUP:
References
MANUFACTURING PROCEDURES
For bulk materials mentioned below, refer to (WP 0104).
Tailgate Release Air Cylinder Tubes
1.
Fabricate from bulk Part Number NT10006 (79470), 3/8 in. OD nonmetallic tubing.
2.
Cut to 36 in. long to make Part Number 245786X36.
3.
Cut to 38 in. long to make Part Number 245787X38.
Material Control System (MCS) Air Cylinder Tube
1.
Fabricate from bulk Part Number 020003-7 (79146), 3/8 in. OD copper tubing.
2.
Cut to approximately 12 in. long, then cut to fit and flare ends to make Part Number 010029X12.
3.
Two required per each MCS air cylinder.
MCS Tailgate Air Tubes
1.
Fabricate from bulk Part Number NT10006 (79470), 3/8 in. OD nonmetallic tubing.
2.
Cut to 66 in. long to make Part Number 245538X66.
3.
Cut to 21 in. long to make Part Number 245539X21.
4.
Cut to 17 in. long to make Part Number 245540X17.
5.
Cut to 8 in. long to make Part Number 245541X8.
6.
Cut to 31 in. long to make Part Number 245542X31.
7.
Cut to 9 in. long to make Part Number 245543X9.
8.
Cut to 144 in. long to make Part Number 245544X144.
Dump Body Side Board
1.
Fabricate from bulk Part Number MILL2037 (81349), 2.0 in. x 8.0 in. rough sawn hardwood.
2.
Cut to fit 148.75 in. long to make Part Number 403345X148.75.
3.
Two required per dump body.
Hydraulic Reservoir Sight Tube
1.
Fabricate from bulk Part Number PT 24006NA (79470), 3/8 in. OD clear tubing.
2.
Cut to 1.50 ft long to make Part Number 239635X1.50.
0075-1
03/15/2011Rel(1.10)root(manuwp)wpno(M1005726413)
