TM 5-3805-274-13&P
FIELD MAINTENANCE
DUMP BODY REPAIR
INITIAL SETUP:
Equipment Condition
Tools and Special Tools
Parking brake set (TM 9-2320-273-10).
Tool kit, general mechanic's: automotive
(WP 0074, Table 2, Item 1)
Standard Automotive Tool Set (SATS)
(WP 0074, Table 2, Item 2)
Hydraulic jack (WP 0074, Table 2, Item 14)
WARNING
Faceshield must be worn when removing rust or surface scale using a
wire brush, sandblast, grit blast, or other effective methods. Failure to
comply may result in injury to personnel. Seek medical attention in the
event of an injury.
NOTE
If paint or welding repairs are found necessary, notify supervisor.
REPAIR
1. Straighten small dents using hammer of appropriate weight.
CAUTION
Use caution and ensure braced area is stronger than area requiring
straightening. Failure to comply may result in damage to equipment.
2. Hydraulic jack or clamp may be useful in straightening large dents.
END OF TASK
END OF WORK PACKAGE
0048-1/2 blank