TRUCK SERVICE MANUAL
TRANSMISSIONS
Section 5. DISASSEMBLY OF TRANSMISSION Para5-1/5-2
INTO SUBASSEMBLIES
5-1. SCOPE OF SECTION 5
This section covers the disassembly
of the transmission It is arranged in
a continuous sequence to facilitate as-
sembly Certain illustrations will not
always illustrate the model being dis- ,.,
assembled, but when the operation is
identical the illustration may be refer-
enced and will correctly illustrate the
procedure.
Fig. 5-1. Installing transmission overhaul stand
5-2. REMOVING EXTERNAL X
COMPONENTS
a. Mounting Transmission In Overhaul Stand
(1) Overhaul stands, and mounting of
the
transmission therein, will vary. Figure 5-1 shows the
transmission installed in a typical overhaul stand.
(2) Before installing the lifting bracket onto the
transmission, remove any bolts which cannot be
removed due to obstruction by the bracket.
b. Removing External Components
(1) Remove the self-locking nut from the output
shaft (fig. 5-1). Remove the flange.
(2) On models having a two-bolt top cover on the
converter housing, remove two bolts 12 (A, foldout 8),
two washers 13, cover 14 and gasket 15.
3i82z8
724