TRUCK SERVICE MANUAL
TRANSMISSIONS
HT 700D SERIES TRANSMISSION
Para 5-5/5-6
Fig. 5-14. Removing trimmer valve body
(7) Remove eighteen bolts from the control valve
(fig. 5-16). Remove one selector lever detent retainer
bolt. Do not remove the bolt (0. 725-long) that retains the
Fig. 5-16 Control valve body bolt locations
selector valve.
(8) Remove the four bolts, two washers and baffle
that retain the oil transfer plate (fig. 5-16).
(9) Remove the controlvalve body assembly,
separator plate and transfer plate as a unit (fig. 5-17).
Refer to paragraph 6-4 for rebuild of the control valve
body assembly.
5-6. REMOVING TORQUE CONVERTER AND PTO
COMPONENTS
a. Converter Stator, Pump
(1) Holding the stator assembly, lock the stator and
the freewheel roller race together by rotating the stator in
a counterclockwise direction. (Refer to figure 5-6.)
Fig. 5-17 Removing control valve assembly
728