TRUCK SERVICE MANUAL
TRANSMISSIONS
DISASSEMBLY
Para5-9
Fig. 5-31 Removing forward clutch assembly
Fig. 5-32 Removing fourth-clutch assembly
(4) Refer to paragraph 6-18 for rebuild of the forward
clutch and turbine shaft a assembly.
(5) Place the hooked legs of lifting tool 18 (fig. 4-2)
under the edges of the fourth clutch spring retainer (fig.
5-32).
NOTE
Keep both front and rear bearing races with the clutch
assembly during rebuild.
(6) Refer to paragraph 6-18 for rebuild of the fourth-
clutch assembly.
b. Third Clutch
(1) Remove the snapring (fig. 5-32) that retains the
third-clutch back plate. Re move the back plate. Fig. 5-
33 Center support anchor bolt
(2) Remove eight third-clutch plates.
Fig. 5-33 Center support anchor bolt
NOTE
Tie the third-clutch plates together, and identify the pack.
Identification is required at assembly.
731