TM 5-3805-254-20-1
ACCELERATOR CONTROL LEVER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Flat sides of pivot arm assembly must aline with slot on lever assembly.
10. Pivot arm
Lever assembly (2)
Slide on.
assembly (1)
11. Lever assembly (2)
Screw (3), two flat
Screw on and tighten using, 9/16-inch,
washers (4), new
1/2-inch drive socket, 12-inch extension,
lockwasher (5),
ratchet handle, and 9/16-inch box-end
and nut (6)
wrench.
12.
Accelerator control
a.
Put in accelerator control rod.
rod (7), new lock-
b.
Screw on and tighten using 7/16-inch
washer (8), and
and 112-inch open-end wrenches.
nut (9)
NOTE
For more information on cotter pins, go to General Maintenance Instructions (page
2-VI-1).
13.
Swivel (10), flat
a.
Put in swivel.
washer (11), and
b.
Put on flat washer.
new cotter pin (12)
c.
Put in cotter pin and bend back ends
using 6-inch diagonal-cutting pliers.
14. Fuel pump bracket
Spring (14)
Put on using 6-inch slip-joint pliers.
(13) and accelerator
control rod (7)
2-566
