TM 5-3805-254-20-1
ACCELERATOR CONTROL PIVOT ARM
This task covers:
a.
Removal (page 2-568)
c.
Inspection (page 2-571)
b.
Cleaning (page 2-570)
d.
Installation (page 2-572)
INITIAL SETUP
Tools Materials/Parts - Continued
Extension, 12-inch, 1/2-inch drive
Lockwasher, accelerator control rod
Goggles, safety
Lockwasher, lever assembly
Gun, blow, air
Lockwasher, pivot arm assembly (two required)
Handle, ratchet, 1/2-inch drive
Hose, air, assembly
Personnel Required
Pliers, diagonal-cutting, 6-inch
Pliers, slip-joint, 6-inch
One
Socket, 7/16-inch, 1/2-inch drive
Socket, 9/16-inch, 1/2-inch drive
Equipment Condition
Wrench, box-end, 9/16-inch
Wrench, open-end, 7/16-inch
Right and left side hood panels opened
Wrench, open-end, 1/2-inch
(page 2-424).
Left side cab door opened (page 2-424).
Materials/Parts
Air cleaner element removed (page 2-452).
Battery cables disconnected (page 2-424).
Cotter pin, pedal bracket
Engine cover removed (page 2-1270).
Detergent, liquid, GP (item 7,
appendix C)
References
TM 9-247 (Authorized Cleaning Methods)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Fuel pump bracket
Spring (3)
Using 6-inch slip-joint pliers, take off.
(1) and accelerator
control rod (2)
2.
Lever assembly (4)
Accelerator control
a.
Using 112-inch and 7/16-inch open-
rod (2), nut (5), and
end wrenches, unscrew and take off.
lockwasher (6)
b.
Get rid of lockwasher.
2-568
