TM 5-3805-254-20-1
MUFFLER AND RAIN CAP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
24.
Exhaust
Muffler (2)
Put on and rotate so that muffler is closest to
diverter (1)
dump truck cab and will not interfere with
right side door and dump body operation.
25.
Muffler (2)
Muffler guard (3)
Rotate until grab handle is at a 45-degree
angle from right side door.
26.
Two mounting
Two nuts (5) and
Tighten using two 9/16-inch box-end
clamps (4)
two screws (6)
wrenches.
27.
Muffler (2)
Muffler pipe (7)
Rotate until outlet faces away from dump
truck.
28.
Muffler (2)
Loop clamp (8) and
Position around muffler and through upper
saddle (9)
support (10).
29.
Loop clamp (8)
Two nuts (11) and
Put on and tighten using 9/16-inch box-end
two flat
wrench.
washers (12)
30.
Muffler pipe (7)
Loop clamp (13) and
Position around muffler pipe and through
saddle (14)
spacer bracket (15).
31.
Loop clamp (13)
Two nuts (16) and
Put on and tighten using 9116-inch box-end
two flat
wrench.
washers (17)
32.
Muffler pipe (7)
Rain cap (18)
Rotate until hinge faces towards front of
dump truck.
33.
Rain cap (18)
Nut (19)
Tighten using 1/2-inch box-end wrench.
2-610
