TM 5-3805-254-20-1
MUFFLER AND RAIN CAP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT - CONTINUED
15.
Muffler (1), muffler
a.
Look for cracks, holes, broken welds,
pipe (2), and muffler
and excessive rust.
guard (3
b.
Look for dents and bends which would
restrict exhaust flow.
16.
Rain cap (4)
Check for freedom of movement.
17.
All threaded parts
Look for damaged threads or rounded
heads.
ASSEMBLY
18.
Muffler guard (3)
Two mounting clamps
a.
Aline holes with mounting clamps and
(5), grab handle (6),
grab handle.
two screws (7), two
b.
Screw in and tighten using 1/2-inch
new lockwashers (8),
box-end wrench.
and two flat washers (9)
19.
Two mounting
Two screws (10), two
Screw in and tighten using two 9/16-inch
clamps (5)
flat washers (11),
box-end wrenches.
and two nuts (12)
20.
Muffler (1)
Muffler guard (3),
a.
Position muffler guard on muffler.
two mounting clamps
b.
Aline mounting clamps.
(13), two new lock-
c.
Screw in and tighten using 9/16-inch
washers (14), and
box-end wrench.
two nuts (15)
Tighten only enough to hold in place.
21.
Two screws (16)
Screw in and tighten using 9/16-inch box-
and two new lock-
end wrench.
washers (17)
22.
Muffler pipe (2)
Put on.
23.
Muffler pipe (2)
Rain cap (4), screw
Put on.
(18), and nut (19)
Do not tighten nut.
2-608
