TM 5-3805-254-20-1
MUFFLER AND RAIN CAP
This task covers:
a.
Removal (page 2-604)
d.
Inspection/Replacement (page 2-607)
b.
Disassembly (page 2-605)
e.
Assembly (page 2-608)
c.
Cleaning (page 2-607)
f.
Installation (page 2-609)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Brush, wire
Lockwasher, grab handle (two required)
Gloves, safety
Lockwasher, mounting clamp (four required)
Goggles, safety
Wrench, box-end, 1/2-inch
Personnel Required
Wrench, box-end, 9/16-inch (two
required)
Two
Materials/Parts
Equipment Condition
Rags, wiping (item 15, appendix C)
Dump body raised and secured (page 2-424).
Solvent, dry-cleaning (item 19,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Exhaust system parts become very hot when engine is running. Allow time for parts to cool
before working on exhaust system. Hot exhaust system parts will cause serious burns.
1.
Loop clamp (1) and
Two nuts (3) and
Using 9/16-inch box-end wrench, loosen
spacer bracket (2)
two flat washers (4)
and take off.
2.
Muffler(5)
Loop clamp (1) and
Take off.
saddle (6)
WARNING
Assistant must support muffler to prevent falling and causing personal injury.
3.
Loop clamp (7) and
Two nuts (9)
Using 9/16-inch box-end wrench, loosen
upper support (8)
and two flat
and take off.
washers (10)
2-604
