TM 5-3805-254-20-1
EXHAUST DIVERTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
11.
Exhaust diverter (1)
Four springs (7),
Put on.
four studs (8),
and exhaust shield
plate (9)
12.
Exhaust shield
Four locknuts (10)
Screw on using 3/4-inch box-end wrench
plate (9)
until four springs begin to compress, then
tighten one additional turn.
13.
Muffler (3) and
Loop clamp (12)
Put in position.
upper support (11)
and saddle (13)
14.
Loop clamp (12)
Two nuts (14)
Screw on and tighten using 9/16-inch box-
and two flat
end wrench.
washers (15)
FOLLOW-ON MAINTENANCE:
1. Install exhaust pipe (page 2-590).
2. Release and lower dump body (page 2-424).
TASK ENDS HERE
TA244092
2-603
