TM 5-3805-254-20-1
ACTION
LOCATION
ITEM
REMARKS
42.
Metallic hose (15)
Loop clamp (17)
Put loop clamp and saddle in position.
and exhaust
and saddle (18)
Loop clamp must secure connection of
diverter (16)
metallic hose and exhaust diverter.
43.
Loop clamp (17)
Two nuts (19)
Screw on and tighten using 11/16-inch box-
and two flat
end wrench.
washers (20)
NOTE
FOLLOW-ON MAINTENANCE: Close right side hood panel (page 2-424).
TASK ENDS HERE
TA244090
2-599
