TM 5-3805-254-20-2
DRY AIR RESERVOIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Drain air from airbrake system before removing lines or fittings to avoid injury to personnel from
compressed air.
1.
Dry air
Two draincocks (2)
Turn to open.
reservoir (1)
Allow all compressed air to drain.
NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
2.
90-degree elbow (3)
Airhose to tee (4)
a.
Tag.
b.
Using 1-inch open-end wrench, unscrew
and take off.
3.
45-degree elbow (5)
Airhose to tee (6)
a.
Tag.
b.
Using 1-inch open-end wrench, unscrew
and take off.
4.
90-degree elbow (7)
Airhose to relay
a.
Tag.
valve (8)
b.
Using 1 1/4-inch open-end wrench,
unscrew and take off.
5.
90-degree elbow (9)
Airhose to wet air
a.
Tag.
reservoir rear (10)
b.
Using 7/8-inch open-end wrench,
unscrew and take off.
6.
90-degree elbow(11)
Airhose to wet air
a.
Tag.
reservoir front (12)
b.
Using 7/8-inch open-end wrench,
unscrew and take off.
7.
Two cable
Two nuts (14), two
a.
Using 9/16-inch, 1/2-inch drive deep
assemblies (13)
lockwashers (15), and
socket, 6-inch extension, and ratchet
two flat washers (16)
handle, unscrew and take off.
b.
Get rid of lockwashers.
8.
Bracket (17)
Two cable
Pull out and move out of way.
assemblies (13)
2-976
