TM 5-3805-254-20-2
DRY AIR RESERVOIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
CLEANING
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective safety goggles and gloves and use
only in a well-ventilated area. Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do
not use near open flame or excessive heat. The flashpoint for type #1 drycleaning solvent is 100°F (38°C)
and for type #2 is 138°F (59°C). If you become dizzy while using cleaning solvent, get fresh air
immediately, and get medical aid. If contact with eyes is made, flush your eyes with water and get medical
aid immediately.
Safety goggles must be worn when using wire brush. Flying rust and metal particles can cause eye injury.
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
24.
Dry air
a.
Clean rust, scale, and corrosion from
reservoir (1)
outside surfaces using wire brush.
b.
Wipe clean using drycleaning solvent
and wiping rag.
c.
To touchup or repaint, refer to
TM 43-0139.
25.
Step (2)
a.
Clean rust, scale, and corrosion using
wire brush.
b.
Wipe clean using drycleaning solvent
and wiping rag.
c.
To touchup or repaint, refer to
TM 43-0139.
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-424).
2-980
