TM 5-3805-254-20-2
PARKING BRAKE CONTROL VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
3.
Instrument panel (1)
Two screws (2) and
a.
Using number one cross-tip screwdriver,
lockwashers (3)
unscrew, and take off.
b.
Get rid of lockwashers.
4.
Parking brake
Take off.
control valve (4)
INSTALLATION
5.
Instrument panel (1)
Parking brake
Put in place.
control valve (4)
6.
Two screws (2) and
Screw in and tighten using number one cross-tip
new lockwashers (3)
screwdriver.
7.
Parking brake
Nut (5)
Using 7/16-inch open-end wrench, screw on.
control valve (4)
Do not tighten.
8.
Knob (6)
Screw on.
9.
Nut (5)
Using 7/16-inch open-end wrench, tighten against
knob (2).
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install parking brake lines and fittings (page 2-1025).
2.
Install lower center instrument panel (page 2-424).
TASK ENDS HERE
TA702139
Change 1 2-1024.2
