TM 5-3805-254-20-2
PARKING BRAKE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
9.
Driver’s side
Screw (2) and
a.
Using 3/8-inch box-end wrench, un-
firewall (1)
clamp (3)
screw and take out.
b.
Take off clamp.
10.
Driver’s seat
Line nut (5) and
Using 9/16-inch open-end wrench, un-
valve assembly (4)
air line (6)
screw and take off.
11.
Left side cab
Fourteen screws
a.
Using number two cross-tip screw-
floor (7)
(8) and left scuff
driver, unscrew and take out.
plate (9)
b.
Take off left scuff plate.
12.
Left side rear
Eight screws (11),
a.
Using number two cross-tip screw-
cab wall (10)
eight flat washers
driver, unscrew and take out.
(12), and left lower
b.
Push air line (6) through hole while tak-
rear molding (13)
ing off left lower rear molding.
Be careful not to bend or crimp air
line.
13.
Cab floor through-
Line nut (15) and
a.
Using 5/8-inch open-end wrench, un-
connector 90-degree
air line (16)
screw and take off.
elbow (14)
b.
Take out air line.
TA244352
2-1028
