TM 5-3805-254-20-2
PARKING BRAKE LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Care must be taken when working behind instrument panel to prevent damaging wires or components.
NOTE
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1.
Parking brake con-
Air line (3)
Tag.
trol valve (1)
to double check
valve (2)
2.
Line nut (5) and
Using 5/8-inch open-end wrench, unscrew
45-degree elbow (4)
and take off.
3.
Line nut (7),
a.
Using 5/8-inch open-end wrench, un-
air line (3), and
screw and take off.
fitting (6)
b.
Take out air line.
4.
Parking brake con-
Air line (9)
Tag.
trol valve (1) to
power divider con-
trol valve (8)
5.
T-fitting (10)
Line nut (11)
Using 9/16-inch open-end wrench, un-
screw and take off.
6.
Power divider
Line nut (13), air line
a.
Using 9/16-inch open-end wrench, un-
control valve (8)
(9), and 90-degree
screw and take off.
elbow (12)
b.
Take out air line.
7.
Parking brake con-
Air line (15)
Tag.
trol valve (1) to
cab floor through-
connector (14)
Change 1 2-1026
