TM 5-3805-254-20-2
AIR COMPRESSOR GOVERNOR TO AIR DRYER LINES AND FITTINGS
This task covers:
a.
Removal (page 2-1040)
c.
Inspection/Replacement (page 2-1043)
b.
Cleaning (page 2-1042)
d.
Installation (page 2-1044)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Solvent, drycleaning (item 19, appendix C)
Goggles, safety
Tags, marker (item 21, appendix C)
Wrench, box-end, 7/16-inch
Tape, antiseizing (item 22, appendix C)
Wrench, open-end, 7/16-inch
Wrench, open-end, 9/16-inch
Personnel Required
Wrench, open-end, 5/8-inch
One
Materials/Parts
Equipment Condition
Lockwasher, clamp screw, front
Lockwasher, clamp screw, rear
Airbrake system drained (page 2-1034).
Rag, wiping (item 15, appendix C)
Left side hood panel opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
NOTE
Air line is in three sections. Tag sections from front to rear of truck as section 1, section 2, and section 3.
For more information on how to tag parts, go to General Maintenance Instructions (page 2-424).
1.
Air compressor
Air line (2)
Tag.
governor (1)
2.
Air line (2)
Line nut (3)
Using 5/8-inch open-end wrench, unscrew
and take off.
2-1040
