TM 5-3805-254-20-2
LOW AIR-PRESSURE WARNING BUZZER SWITCH - CONTINUED
INITIAL SETUP - CONTINUED
Equipment Condition - Continued
Battery ground cable disconnected (page 2-424).
Left cab door opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind instrument panel to prevent breaking or disconnecting wires.
1.
Low air-pressure
Screw (2), lock-
a. Using 3/16-inch flat-tip screw-
warning buzzer
washer (3), and
driver, unscrew and take out.
switch (1)
wire (4)
b. Get rid of lockwasher.
2.
Right manifold (5)
Low air-pressure
Using 8-inch slip-joint pliers, unscrew and
warning buzzer
take out.
switch (1)
INSTALLATION
CAUTION
Use care when working behind instrument panel to prevent breaking or disconnecting wires.
3.
Right manifold (5)
Low air-pressure
a. Clean pipe threads with wiping rag.
warning buzzer
b. Screw in and tighten using 8-inch slip-
switch (1)
joint pliers.
4.
Low air-pressure
Wire (4), new lock-
a. Put wire in place.
warning buzzer
washer (3), and
b. Screw in and tighten using 3/16-inch
switch (1)
screw (2)
flat-tip screwdriver.
2-700
