TM 5-3805-254-20-2
SECONDARY MAGNETIC SWITCH - CONTINUED
INITIAL SETUP
Tools
Personnel Required
Wrench, box-end, 11/32-inch
One
’
Wrench, box-end, 7116-inch
Wrench, box-end, 5/8-inch
Equipment Condition
Wrench, open-end, 7/16-inch
Battery ground cable disconnected
Materials/Parts
(page 2-424).
Right cab door opened (page 2-424).
Lockwasher, mounting (two required)
Instrument panel pad removed (page 2-424).
Lockwasher, small (two required)
Lockwasher, large (two required)
Tags, marker (item 21, appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Use care when working behind instrument panel pad to prevent breaking or disconnecting wires.
1.
Secondary magnetic
Nut (2), wire (3),
a. Tag wire (page 2-424).
switch (1)
and two lock-
b. Using 11/32-inch box-end wrench, un-
washers (4)
screw and take out.
c. Get rid of lockwashers.
2.
Two nuts (5), four
a. Tag wires (page 2-424).
wires (6), and two
b. Using 5/8-inch box-end wrench, un-
lockwashers (7)
screw and take out.
c. Get rid of lockwashers.
3.
Two screws (8), two
a. Using 7116-inch box-end and 7/16-inch
lockwashers (9), and
open-end wrenches, unscrew and take
two nuts (10)
out.
b. Get rid of lockwashers.
INSTALLATION
CAUTION
Use care when working behind instrument panel pad to prevent breaking or disconnecting wires.
2-704
