TM 5-3805-254-20-2
AIR HORN CONTROL VALVE
This task covers:
a
Removal (page 2-1355)
d
Inspection/Replacement
b
Disassembly (page 2-1357)
(page 2-1358)
c
Cleaning (page 2-1358)
e
Assembly (page 2-1358)
f
Installation (page 2-1360)
INITIAL SETUP
Tools
Materials/Parts - Continued
Brush, cleaning
Rags, wiping (item 15, appendix C)
Pliers, slip-joint, 6-inch long
Tags, marker (item 21, appendix C)
Screwdriver, number one, cross-tip
Tape, antiseizing (item 22,
Wrench, open-end, 112-inch
appendix C)
Wrench, open-end, 9/16-inch
Wrench, open-end, 5/8-inch
Personnel Required
Wrench, open-end, 11/16-inch
Wrench, open-end, 13/16-inch
One
Materials/Parts
Equipment Condition
Detergent, liquid GP (item 14,
Air system drained (page 2-1034)
appendix C)
Pin, cotter
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1
Lever (1)
Cotter pin (2) and
a
Using 6-inch slip-joint pliers take out
pull chain (3)
cotter pin.
b
Take off pull chain.
c
Get rid of cotter pin.
TA244558
2-1355
