TM 5-3805-254-20-2
AIR HORN CONTROL VALVE -CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
19 Access hole (1) and
Bracket (3) and two
a
Put in bracket and aline holes in bottom
panel (2)
screws (4)
of bracket with holes in panel (2).
b
Screw in two screws using number one
cross-tip screwdriver.
Do not tighten.
20 Elbow fitting (5)
Line nut (6)
a
Screw on using 9/16-inch open-end
wrench.
Do not tighten.
b
Take off tag.
c
Get rid of tag.
21 Elbow fitting (7)
Line nut (8)
a
Screw on using 5/8-inch open-end
wrench.
Do not tighten.
b
Take off tag.
c
Get rid of tag.
22 Tee fitting (9)
Line nut (10)
a
Screw on using 5/8-inch open-end
wrench.
Do not tighten.
b
Take off tag.
c
Get rid of tag.
23 Bracket (3)
Air horn control
a
Put in while alining lever (13) with hole
valve (11), and
in lever (14).
two screws (12)
b
Screw in two screws and tighten
using number one cross-tip screw-
driver.
24 Panel (2)
Two screws (4)
Tighten, using number one cross-tip
screwdriver.
25 Elbow fitting (5)
Line nut (6)
Tighten, using 9/16-inch and 1/2-inch
open-end wrenches.
26 Elbow fitting (7)
Line nut (8)
Tighten, using 5/8-inch and 11/16-inch
open-end wrenches.
2-1360
