TM 5-3805-254-20-2
AIR HORN CONTROL VALVE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
27 Tee fitting (9)
Line nut (10)
Tighten, using 518-inch and 1/2-inch
open-end wrenches.
28 Panel (15)
Cover (16) and
a
Put cover in place.
two screws (17)
b
Screw in two screws and tighten, using
number one cross-tip screwdriver.
29 Head panel (18)
Pull chain (19)
a
Put pull chain in position.
and screw (20)
b
Screw in and tighten using number one
cross-tip screwdriver.
30 Lever (1)
Pull chain (19) and
a
Put pull chain in place.
new cotter pin (21)
b
Put in and bend ends back using 6-inch
slip-joint pliers
TA244561
TASK ENDS HERE
2-1361
