TM 5-3805-254-20-2
Section XX. HYDRAULIC AND FLUID SYSTEM MAINTENANCE
Page
Page
Dump Body Control Lever and ...................
Reservoir-To-Pump Suction Hose
Linkage ................................................ 2-1367
and Fittings ....................................... 2-1390
Hydraulic Filter and Housing ...................... 2-1362
Valve-To-Cylinder Pressure
Hydraulic Oil Reservoir............................... 2-1375
Hoses and Fittings ..................................... 2-1400
Pump-To-Valve Pressure Hose and...........
Valve-To-Reservoir Return
Fittings ................................................. 2-1385
Hose and Fittings.............................. 2-1395
HYDRAULIC FILTER AND HOUSING
This task covers:
a
Removal (page 2-1362)
c
Inspection/Replacement (page 2-1364)
b
Cleaning (page 2-1364)
d
Installation (page 2-1365)
INITIAL SETUP
Tools
Materials/Parts
Container, 6-gallon
Element, filter, hydraulic
Extension, 10-inch
Gasket, ring, hydraulic filter
Gloves, safety
Solvent, drycleaning (item 19, appendix C)
Goggles, safety
Tape, antiseizing (item 22, appendix C) _
Gun, blow, air
Handle, ratchet, 1/2-inch drive
Personnel Required
Hose, air, assembly
Screwdriver, flat-tip, 3/16-inch
One
Socket, 5/8-inch, 1/2-inch drive
Wrench, open-end, 7/16-inch
References
LO 5-3805-254-12 (Lubrication Order)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not drain hydraulic oil when hot. Hot oil can burn you.
1
Suction hose (1)
Valve (2)
Turn clockwise to close.
2-1362
