TM 5-3805-254-34
6-14.
CONTROL VALVE REPLACEMENT (Con’t).
b.
INSTALLATION
1
Ensure that pin on selector lever (13) engages selector valve (11) and install control valve (15), separator plate (10),
and transfer plate (9), as an assembly, to transmission housing (14).
2
Install oil baffle (8) to transfer plate (9) with two bolts (7).
3
Install 15 bolts (4) and three bolts (1) to control valve (15).
4
Install two new lockwashers (16) and bolts (17).
5
Install selector lever spring (2) to control valve (15) with bolt (3).
6
Install cover plate (6) to separator plate (10) with eight bolts (5).
7
Torque all bolts to 8-12 lb.-ft (11-16 N•m).
FOLLOW-ON TASKS:
•
Install low shift valve (see paragraph 6-13).
6-85
