TM 5-3805-254-34
6-15.
OIL PUMP, FRONT SUPPORT, AND CONVERTER HOUSING REPLACEMENT (Con’t).
6.
Apply coat of grease to surface of bearing ring (14),
thrust bearing (13), and two new seal rings (12).
7.
Install flat side first, bearing ring (14), thrust bearing
(13), and two new seal rings (12) to front support
(15).
8.
Turn converter housing (5) over and install seal ring
(16).
9.
While holding converter housing (5) in a vertical
position, Install oil pump (17) to converter housing
with six long bolts (18). Torque bolts to 36-43 lb.-ft.
(49-58 N•m).
TA703811
6-90
