TM 5-3805-254-34
6-15.
OIL PUMP, FRONT SUPPORT, AND CONVERTER HOUSING REPLACEMENT (Con’t).
CAUTION
Do not damage pitot tube.
NOTE
Ensure that thrust bearing and bearing ring are still In place on front support.
14. Install converter housing (5) to transmission housing
(10) with seven screws (3) and new lockwashers (4)
Inside converter housing. Torque screws to 67-80
Ib.-ft. (91-108 N•m).
15. Remove one guide screw (22) and install one
washer (1) and small screw (2) to secure pitot tube
(11) to converter housing (5).
16. Remove other guide screw (22) and install other
washer (1) and small screw (2). Torque screws to
30-48 lb.-ft. (41-65 N•m).
TA703813
6-92
